I previously mentioned a Vulcan Iron Works steam donkey at Funter Bay in one of my earlier posts on steam power and internal combustion. Recently I acquired a photo which shows a very similar device at Funter, perhaps the same one. This photo is likely from the summer of 1919.
The photo was taken at the corner of the main Thlinket Packing Co warehouse, seen below:
The steam donkey seen in 1919 and the one in my modern photos look nearly identical to me. The layout of pipes, the piston parts, and the boiler door all appear to match. The donkey in 1919 is mounted on large logs. My modern-day photos do not show any logs under the engine, but loose spikes are visible (the logs likely rotted away or were removed). John Taubeneck provided some details on the Vulcan Iron Works in a comment on my earlier post, noting that there are only a few of these donkeys remaining. He believes the unit pictured above is slightly smaller than the one in the woods, but it is hard to tell.
Neither photo shows the conical top or smokestack seen on other Vulcan donkeys, in the 1919 image they may have been removed for shipping, and by the time of my photos the stack seems to have rusted off and fallen to the ground (a few decades ago it was still mostly upright and covered with a washtub).
The remaining donkey is across the bay at the base of the mountain where it powered an aerial mine tram. If these are the same unit, it may have originally been owned by the cannery and later sold to the mine. As the cannery used mainly low-horsepower gas engines on-site, a steam engine would likely have been used somewhere off the property. It could have served as a pile driver engine, or been used for logging in Kelp Bay or elsewhere.
The men posing on the donkey in the 1919 photo seem to have been a group of Seattle high school students. They will probably be discussed in an upcoming post.